Material Data Sheet 1.4435, X2CrNiMo18-14-3

Material data for 1.4435

The material 1.4435 is a high-alloy, stainless and acid-resistant stainless steel with the abbreviation X2CrNiMo18-14-3. In the American ASME standard, it has the designation UNS S31603.

How far does the scope of the information listed here extend?

The data below applies to hot-rolled and cold-rolled sheet and strip from our product range.

The information given here on properties/usability is not a guarantee of properties, but is for descriptive purposes only. The information is for advisory purposes and is based on information from the standards/sources: DIN EN 10088-2, DIN EN 10028-7, AD 2000 W2/W10, ASME code SA240/480, reference book Steel Code.

We cannot accept any liability for the information or the results of processing/application.

What are other designations for 1.4435?

ASME (incl. double attestation): SA240 316/316L

EN (incl. double attestation): 1.4435

How is the material 1.4435 heat-treated and processed?

Temperature: 1.030–1.110 °C
Cooling methods: Water, air
Microstructure: austenitic
Microstructure polishable: yes
Possible welding processes: Gas-shielded welding, arc welding, resistance welding

	C	Si	Mn	P	S	Cr	Ni	Mo	Ti	N
min						17,000	12,500	2,500
max	0,030	0,750	2,000	0,045	0,015	18,000	14,000	3,000	0,050	0,100

min

17,000

12,500

2,500

max

0,030

0,750

2,000

0,045

0,015

18,000

14,000

3,000

0,050

0,100

Mechanical properties at room temperature:

(in the solution-annealed state)

The values below take into account the above-mentioned double attestations. Limit values from EN 10088-2, EN 10028-7, AD 2000 W2/W10 and according to ASME SA240/480.

C = cold-rolled strip; H = hot-rolled strip; P = plate

In accordance with AD 2000 regulations, the KBZ is only carried out and confirmed in the certificate for thicknesses > 20 mm.

		Yield strength	Tensile Strength	Elongation at break	Notch impact energy (ISO-V)
C	8	240	270	550–700	40	40	60
H	13,5	220	260	550–700	40	40	60
P	75	220	260	520–670	45	40	60

Yield strength

Tensile Strength

Elongation at break

Notch impact energy (ISO-V)

Product form

Thickness [mm] max

Rp_0,2

Rp_1,0

A₅

A₅₀

≥ 10 mm Thickness

[N/mm2] min

[N/mm2]

[%] min

[J] transverse

240

270

550–700

13,5

220

260

550–700

220

260

520–670

Density at 20 °C	Modulus of elasticity at 20 °C	Specific heat capacity at 20 °C	Thermal conductivity at 20 °C	Electrical resistance at 20 °C
8	200	0,50	15	0,75

Density
at 20 °C

Modulus of elasticity
at 20 °C

Specific heat capacity
at 20 °C

Thermal conductivity
at 20 °C

Electrical resistance
at 20 °C

kg/dm³

GPa

J / g x K

W / K x m

Ω x mm² / m

200

0,50

0,75

Field of application

Petroleum and petrochemical industry, chemical industry, synthetic fibre production, medical and pharmaceutical industry, production of electronic equipment, textile and artificial silk industry The steel is resistant to intergranular corrosion as supplied (e.g. ASTM A262 Pr. E / EN 3651-2); resistance is also guaranteed in the welded condition due to the low C content.

Material No.: 1.4435